Walls
SnH(gv) - basement outer wall with thermal insulation layer on the exterior, protected from mechanical injury; load affecting thermal insulation – medium.
Roofs
StS - superposed roof, insulated with two separate layers of polystyrene foam. The upper EPS layer ensures the roof’s mechanical strength, whereas the lower layer ensures a sufficient degree of thermal insulation.
StH(gv) - roof with thermal insulation, protected from atmospheric precipitation by rolled-out covering; load affecting roof – medium.
Floors
Ggv - floors with thermal insulation under the concrete slab, may be contact with earth below, without sound insulation requirements; load affecting floor surface – medium (halls, cafeterias, restaurants, etc.).
Column insulation diagram for building with unheated basement:
1 - outer basement wall;
2 - continuous glue layer;
3 - polystyrene foam (EPS 100);
4 - T-shaped stainless steel or galvanised metal strip;
5 - 25–40 mm space;
6 - galvanised metal angle bracket;
7 - decorative finish (bricks);
8 - insulated external wall of first floor;
9 - ceiling of basement
10 - polystyrene foam (EPS 70)
SnH(gv) - basement outer wall with thermal insulation layer on the exterior, protected from mechanical injury; load affecting thermal insulation – medium.
Roofs
StS - superposed roof, insulated with two separate layers of polystyrene foam. The upper EPS layer ensures the roof’s mechanical strength, whereas the lower layer ensures a sufficient degree of thermal insulation.
StH(gv) - roof with thermal insulation, protected from atmospheric precipitation by rolled-out covering; load affecting roof – medium.
Floors
Ggv - floors with thermal insulation under the concrete slab, may be contact with earth below, without sound insulation requirements; load affecting floor surface – medium (halls, cafeterias, restaurants, etc.).
Column insulation diagram for building with unheated basement:
1 - outer basement wall;
2 - continuous glue layer;
3 - polystyrene foam (EPS 100);
4 - T-shaped stainless steel or galvanised metal strip;
5 - 25–40 mm space;
6 - galvanised metal angle bracket;
7 - decorative finish (bricks);
8 - insulated external wall of first floor;
9 - ceiling of basement
10 - polystyrene foam (EPS 70)
|
