Polystyrene foam (EPS) – rigid, porous thermal insulating material, which is made of air (98%), enclosed in small polystyrene beads (2 %). This effective insulation material is used to insulate new or modernized buildings from all of its sides outside and inside, make a perfect air tight seal of the building envelope, suppress sound movement. Polystyrene foam maintains its parameters and dimensions during its lifespan. A gray polystyrene (Neopor) foam is gaining its momentum in construction industry, because it shows 20 % higher insulation efficiency compared with white EPS foam at the same density. This phenomenon is caused by small amount of graphite, which improves infrared light reflection from inside while increasing infrared wave absorption from sun. Our polystyrene foam products for construction comply with European Standard LST EN 13163:2012+A1:2015. According to this standard, polystyrene foam products are classified according to their compressive strength, at which a product is deformed by 10 %, and its bending strength. Category: Statybinis putplastis Technical parameters Recommendations for use Accessories Certificates and approvals Technical parameters Type of polystyrene foam EPS 70N Thickness 15-1200 mm (according to individual orders)Standard dimensions 500x1000/ 1000x1000/ 1000x2000/ 1000x4000 mm Options Smooth / overlapping / tapered Contacts Valdemaras, Gytis, Raimondas Technical properties of polystyrene foam according to EPS type EPS type EPS60NEPS70NEPS80NEPS100N Average density (kg/m3)*12,514,516,318,5 Thermal conductivity, λD (W/m·K) ≤ 0,032 ≤ 0,031 ≤ 0,031 ≤ 0,030 Compressive strength at 10 % deformation, (kPa)607080100 Bending strength (kPa)100115125150 Reaction to fireEEEE *Density is not relevant for the classification of polystyrene foam. All properties are declared in accordance with the requirements of the EU standard EN 13163: 2012 + A1: 2015 and related documents. Recommendations for use Plastered or ventilated façade systems Outer wall of the framed house Double-wall masonry Internal wall insulation Slate roof between rafters Slate roof under rafters Floor above soil, under reinforced concrete layer, where the load is average (residential, administrative, recreational and other similar buildings) Ceiling bellow open or unheated spaces Accessories Polystyrene foam cap EPS 200 *minimum order quantity - 50 pcs. Width Ø 69 mm Thickness 20 mm Price with VAT Upon request Polystyrene foam cap Neopor EPS 200N *minimum order quantity - 50 pcs. Width Ø 69 mm Thickness 20 mm Price with VAT Upon request Polystyrene foam countersink drill Width Ø 69 mm Price with VAT Upon request Certificates and approvalsDECLARATIONS OF PERFORMANCE ESD EPS 70N (PDF) CERTIFICATE OF CONSTANCY OF PERFORMANCE Certificate of EPS 70N (PDF) MANAGEMENT SYSTEM ISO 14001:2015, ISO 9001:2015 certificate (PDF) All certificates and approvals Related products EPS 70 Read more EPS 100 Read more EPS 50 Read more EPS 80N Read more
