Heated floor boards

Moulded EPS panels for radiant underfloor heating (EPS 200 G5 NEO and EPS 200 G7 NEO) allows for a quick, convenient and error-proof heated floor system installation. We only use BASF Neopor raw materials to make these boards, which by itself means they will have excellent thermal insulation and mechanical properties. With a minimum amount of insulation, the board will be able to achieve maximum thermal resistance.
Our boards for underfloor radiant heating have special gaps for pipes with 16 mm and 18 mm thickness. Formed diagonal ridges across the board lift the piping from the board surface, thus allowing concrete to encapsulate the tubing from all sides. These boards are especially relevant when a customer wants limited thermal insulation layer thickness or does not want to overload the floor.

Category:

Technical parameters

Type of polystyrene foam
EPS 200N

Thickness
50mm, 70mm

Standard dimensions
1200x600 mm

Price with VAT
Upon request
Other parameters
With interlocking mechanism

 

Technical properties of polystyrene foam boards EPS 200 NEO

 

Underfloor board name
G5
G7
Board thickness (insulating layer thickness) , mm
50 (30)
70 (50)
Long term water absorption by total immersion, WL(T)2
≤ 1,5 %
≤ 1,5 %
Thermal conductivity, λD (W/m·K)
≤ 0,030
≤ 0,030
Compressive stress at 10% deformation, (kPa)
200
200
Bending strength, (kPa)
250
250
Reaction to fire
E
E

All properties are declared in accordance with the requirements of the EU standard EN 13163: 2012 + A1: 2015 and related documents.

Recommendations for use

  • Heated floor installation, where a limited room height loss is allowed
  • Heated floor installation, where a minimal increase in load for the floor is allowed
  • Easy and quick installation of piping for the radiant heated floor, eliminating the possibility of common mistake

Certificates and approvals

DECLARATIONS OF PERFORMANCE

EPS 200 G5 NEO/EPS 200 G7 NEO (PDF)


MANAGEMENT SYSTEM

ISO 14001:2015, ISO 9001:2015 certificate (PDF)